Opens in a new tab
Health and safety consulting for employers across Alberta, British Columbia and Saskatchewan
Hazard assessment and control training course for Canadian workplaces
Course access and group enrolmentEach registration is for one named student. For an individual purchase, sign in to My Account using the email address and account used at checkout. For two or more students, purchase the required quantity, then submit each student’s full name and email address using our Group Training Student Information form. Separate student accounts and course-access instructions will be provided within 24 hours after we receive complete information. Training accounts must not be shared.Group discount: Buy 10 or more seats of the same course in one order and 10% comes off that course automatically at checkout.

Hazard Assessment and Control for Canadian Workplaces

Go to the Course Content

Once you have registered and enrolled, scroll to the Course Content section at the end of this page to begin your lessons.

Table of Contents

Our hazard assessment and control training shows Canadian workers, supervisors and safety program owners how to find hazards before they hurt someone, rate the risk, choose controls that still work on a rushed day, and keep assessments current. This self-paced online course covers formal and informal hazard assessments, Canadian occupational health and safety (OHS) law, CSC Energy Sources, risk rating, the hierarchy of controls, job hazard analyses (JHAs), field-level hazard assessments (FLHAs) and toolbox talks, using realistic examples from construction, health care, warehousing, retail, farming and more.

Hazard assessment and control training course for Canadian workplaces

Need training for your team? For online group training, buy your enrolments here, then complete our Group Training Student Information form so we can set up each worker’s account. If you’d like help building or reviewing the hazard assessments themselves, see our hazard assessments, JHAs and workplace inspections consulting services.

Learn more about how our online safety training works.

Weak hazard assessment can leave hazards uncontrolled and contribute to injuries, illness, equipment damage, work stoppages and audit findings. A practical process can help crews plan the work, obtain the right resources and recognize when conditions require reassessment. Results depend on the employer’s implementation, supervision and follow-up; a course, form or completed assessment alone does not establish compliance, due diligence or control effectiveness.

This is foundation-level (awareness) training. It supports, but doesn’t replace, the employer’s site-specific hazard assessment, orientation, practical training, supervision and competency verification. It doesn’t qualify or authorize anyone for high-risk work such as lockout, confined space entry, fall rescue, atmospheric testing, electrical work or hot work.

Application and Stop-Work Limits

The employer and other duty holders retain responsibility for determining the governing jurisdiction, assessing the actual work and providing the people, time, information, equipment and authority needed to control hazards. Workers must be involved where the governing law requires it and should be consulted because they understand how the work is performed.

  • Use elimination and substitution where feasible, then consider engineering controls before relying on administrative measures or personal protective equipment. Follow any stricter legal, engineering, manufacturer, client or contractual requirement.
  • The CSC 3 × 3 matrix, energy-source prompts and templates are learning aids, not universal legal tests. The employer must define risk criteria, escalation thresholds and approval authority that fit the jurisdiction and work.
  • A JHA, FLHA or toolbox talk does not replace a required permit, code of practice, exposure assessment, engineered procedure, manufacturer instruction or competent-person decision.
  • Assess routine and non-routine work, changing conditions, human factors, foreseeable error, language and literacy needs, contractors, visitors, simultaneous operations and emergency conditions where relevant.
  • Stop work and escalate when a serious hazard is uncontrolled, required information or authorization is missing, conditions differ from the assessment, a control cannot be implemented or verified, or workers disagree about whether the work can proceed safely.
  • Verify controls through field observation, worker and supervisor feedback, inspection or measurement where appropriate, records, corrective-action closure and reassessment after changes, concerns, incidents or evidence that a control is ineffective.

Online Hazard Assessment and Control Course at a Glance

Delivery: 100% online and self-paced
Course format: 16 narrated video lessons in four modules, with written lesson notes, workplace examples and knowledge checks
Course length (estimated): About 4 to 5 hours, including just under 4 hours of lesson video plus knowledge checks and the final quiz
Assessment: A three-question knowledge check after every lesson (100% to continue) and a six-question final quiz (80% to pass)
Resources: Downloadable Training Reference Guide, available after purchase
Certificate: Certificate of Completion issued after you finish all required course steps
Price: $39.99 CAD plus GST
Level: Foundation (awareness)
Audience: Workers, contractors, supervisors, crew leads and safety program owners across Canada
Workplace training: Your employer’s site-specific instruction is still required


What Does Online Hazard Assessment and Control Training Cover?

This hazard assessment and control training walks through the full cycle: identify the hazards, assess the risk, control the highest risks first, communicate the controls, and review when anything changes. Each lesson connects the method to decisions you make on the job.

You’ll learn how to:

  • Explain how uncontrolled contact with energy, or exposure to a harmful condition, causes injury and illness.
  • Tell formal and informal hazard assessments apart, and choose between a formal assessment, a JHA, an FLHA and a quick check.
  • Identify the governing jurisdiction and locate current official sources for the employer, industry, work location and any special regulatory regime.
  • Identify safety, health, ergonomic and psychosocial hazards, including working alone and violence.
  • Use the 12 CSC Energy Sources to find hazards you’d otherwise miss, and flag high-energy hazards.
  • Use the CSC 3 × 3 matrix as a learning tool and compare the result with the employer’s approved risk criteria, stop-work rules and escalation process.
  • Use the hierarchy of controls and recognize when higher-order, direct or specialist-designed controls are needed for a serious hazard.
  • Describe how an employer assigns a responsible person and timeline, implements controls and verifies their effectiveness in the field.
  • Recognize the steps and role limits for JHAs, FLHAs, toolbox talks and supervisor review without treating course completion as task authorization or competency verification.

Every lesson includes a short written summary, a real-world example and a knowledge check, so learners practise applying the method rather than memorizing rules.


Online Hazard Assessment and Control Training for Canadian Workers

Canada has 14 occupational health and safety jurisdictions: one federal, 10 provincial and 3 territorial. Each has its own legislation, terminology and requirements for identifying hazards, assessing risk, involving workers, selecting controls, documenting results and reviewing the work. Jurisdiction depends on the employer and industry as well as location. Federally regulated workplaces use the Canada Labour Code, Part II and its regulations; provincial or territorial rules generally apply to other workplaces in that jurisdiction. Employers must confirm coverage rather than relying on an industry example alone.

This course teaches broadly applicable hazard assessment and control principles and uses selected legal examples to show how requirements differ. The linked Alberta, federal and British Columbia sources were reviewed on November 6, 2026. Learners must confirm the current official law and guidance for their own jurisdiction before relying on the CSC quick reference. The course doesn’t determine whether an employer complies with the law, and it isn’t approved or recognized by a regulator.


Who Should Take This Hazard Assessment and Control Course?

This course is built for anyone who takes part in hazard assessments, whether they’re filling in an FLHA at the start of a shift or approving a JHA for a high-risk task.

It’s suitable for:

  • Workers, including new, young, contract and temporary workers
  • Supervisors, forepersons and crew leads
  • Safety coordinators, managers and business owners who run the safety program
  • Joint health and safety committee members and health and safety representatives
  • Employers building or refreshing their hazard assessment process

Lessons are written for a mixed audience. Some sections explain supervisor and program-owner activities, such as a control action plan or FLHA review, while worker lessons emphasize participation, reporting and stop-work escalation. Employers may use the course as a common starting point, but new JHA and FLHA forms must be adapted to the governing law, workplace, task, workforce and existing procedures, then validated with knowledgeable workers and supervisors before use.


Online Hazard Assessment and Control Training Course Features

Our hazard assessment and control training is designed to be practical and easy to follow.

Course features include:

  • 100% online and self-paced learning
  • 16 narrated video lessons, each about 14 to 17 minutes long
  • Written lesson notes with learning objectives, examples and key takeaways
  • Downloadable Training Reference Guide with lesson summaries, key points, reflection questions and space for notes
  • Realistic examples from many Canadian industries
  • A three-question knowledge check after every lesson, with feedback after each answer
  • A six-question final quiz
  • Certificate of Completion after you finish all required course steps
  • Progress tracking through your training account

The course introduces practical methods for writing a specific hazard statement, distinguishing a direct control from a sign or reminder, and recognizing when work should stop for reassessment. Learners must use their employer’s approved process and act within their assigned role.


Online Hazard Assessment and Control Training Course Modules

The course is organized into four modules of four lessons each. Each lesson is one complete narrated video with written notes and a knowledge check.

Module One: Foundations and Canadian Law

The first module explains why hazard assessment matters, how the different levels of assessment fit together, and what Canadian OHS law requires.

Lessons:

  • Lesson One: Why Hazard Assessment Matters
  • Lesson Two: Formal and Informal Hazard Assessments
  • Lesson Three: Canadian OHS Law: Hazard Identification and Control
  • Lesson Four: Working Alone and Other Hazards Named in Law

By the end of this module, learners can explain key terms and locate the official sources needed to confirm the rights, duties and processes that apply to their work.

Module Two: Identifying Hazards

The second module focuses on finding hazards, including the quiet ones that crews commonly miss.

Lessons:

  • Lesson One: Hazard Categories and Where Hazards Come From
  • Lesson Two: Methods of Hazard Identification
  • Lesson Three: Using CSC Energy Sources to Find Hazards
  • Lesson Four: Common Mistakes in Hazard Identification

Learners practise writing specific hazard statements and flagging high-energy, critical ergonomic and critical psychosocial hazards.

Module Three: Controlling Hazards

The third module moves from finding hazards to rating risk and controlling it.

Lessons:

  • Lesson One: Assessing and Prioritizing Risk
  • Lesson Two: The Hierarchy of Controls
  • Lesson Three: Putting Controls in Place and Making Sure They Work
  • Lesson Four: Common Mistakes in Hazard Control

Learners finish with a control-quality prompt they can compare with an employer-approved JHA or FLHA process. It does not replace supervisor review, technical assessment or authorization required for the work.

Module Four: The Tools: JHA, FLHA and Toolbox Talks

The final module puts the method to work with Calgary Safety Consultants’ procedures and forms.

Lessons:

  • Lesson One: The Job Hazard Analysis (JHA)
  • Lesson Two: The Field-Level Hazard Assessment (FLHA)
  • Lesson Three: Toolbox Talks
  • Lesson Four: Supervising Hazard Assessment and Continuous Improvement

Supervisors and program owners learn how to review assessments, verify controls in the field and use findings to improve the whole system.


Complete Your Online Hazard Assessment and Control Training

Register online, then work through the lessons in order at your own pace. After each video, complete the lesson’s three-question knowledge check. You need all three answers correct (100%) to move on, and you can retry the knowledge check as many times as you need, with feedback after each answer to help you learn.

When you’ve finished all 16 lessons, complete the six-question final quiz. The passing score is 80%, so you need at least five of six correct. If you don’t pass, review the lessons and try again. Once you’ve passed the final quiz and completed all required course steps, you can download your Certificate of Completion.

The certificate records completion of awareness-level online training. It isn’t a qualification, competency record, regulatory approval or authorization for high-risk work. Employers should pair it with site-specific instruction, practical assessment and supervision appropriate to the task.


Frequently Asked Questions About Online Hazard Assessment and Control Training

Is this Hazard Assessment and Control training valid across Canada?

The course teaches hazard assessment and control principles that apply in every Canadian jurisdiction, and it shows how to find the specific rules for federal, provincial and territorial workplaces. It isn’t approved by any regulator, and it doesn’t replace the site-specific training your employer must provide under the law that applies to your work.

Do I receive a Hazard Assessment and Control certificate?

Yes. You receive a Certificate of Completion after completing all lessons and knowledge checks and passing the final quiz. It records awareness-course completion only; it does not establish competency, authorize work, prove legal compliance or replace a task-specific practical assessment.

How long does the online Hazard Assessment and Control course take?

We estimate about 4 to 5 hours. The 16 lesson videos run just under 4 hours in total, and the knowledge checks and final quiz add time depending on your pace. You can stop and return at any time.

Who should take Hazard Assessment and Control training?

Workers, contractors, supervisors, crew leads, safety coordinators, managers, owners and joint health and safety committee members who take part in hazard assessments, FLHAs, JHAs or toolbox talks.

Does the course include JHA and FLHA training?

Module Four introduces a step-by-step approach to JHAs, FLHAs and toolbox talks using Calgary Safety Consultants’ learning examples. Employers must use or develop a process that fits the governing law, hazards, tasks and workforce. The course examples and forms are starting aids and require workplace review and validation before use.

Can employers purchase training for multiple workers?

Yes. Employers can buy online training for two or more workers on this page. After placing your order, complete our Group Training Student Information form with your order number and each learner’s name and email address. We set up each learner’s account and email course-access instructions within 24 hours of receiving complete information.

Does online Hazard Assessment and Control training replace workplace-specific training?

No. This course gives a common foundation. Workers still need instruction on their own workplace’s hazards, assessments, procedures, equipment and emergency plans, plus any practical training and competency verification their tasks require.


Additional Hazard Assessment and Control Resources

The resources below help you apply the learning to a workplace. Use them to check the governing requirements, compare a process with regulator guidance and identify when specialist help is needed. The official links below were reviewed on November 6, 2026. Requirements can change, and the Alberta online consolidation carries its own currency disclaimer, so confirm the current official legislation before relying on it.

Alberta OHS Code, Part 2: Hazard Assessment, Elimination and Control

Issued by: Government of Alberta
Sections 7 to 10 address hazard assessment, worker participation, hazard elimination and control, and emergency control of hazards. Use the current official legislation for Alberta work and confirm any other Parts that apply to the specific hazard or activity.
Alberta OHS Code, Part 2: Hazard Assessment, Elimination and Control

Hazard Prevention Program Guide

Issued by: Employment and Social Development Canada
Explains the federal hazard prevention program framework under Canada Labour Code, Part II, paragraph 125(1)(z.03), and Part XIX of the Canada Occupational Health and Safety Regulations. Use it only after confirming that the employer and work are federally regulated.
Hazard Prevention Program Guide

Assessing Risks

Issued by: WorkSafeBC
Walks through identifying who could be harmed, rating risk and documenting what you find. Use it alongside Module Three when you rate risks, especially for work in British Columbia.
Assessing Risks

Hazard Assessments, JHAs and Workplace Inspections

Issued by: Calgary Safety Consultants
Our consulting support for building, reviewing and improving hazard assessments, JHAs and inspection programs. Use it when your forms, assessments or audit findings need hands-on help.
Hazard Assessments, JHAs and Workplace Inspections

Online Workplace Inspection Training

Issued by: Calgary Safety Consultants
A companion online course on planning inspections, finding hazards and following up on corrective actions. Take it next if you lead or take part in workplace inspections.
Online Workplace Inspection Training

Related courses: Silica Awareness, Online WHMIS Training, Incident Reporting and Investigation Training and OH&S Online Leadership Training.

Course Content

Module One – Foundations and Canadian Law
Module One – Lesson One – Why Hazard Assessment Matters
1 Quiz
Module One – Lesson One – Knowledge Check
Module One – Lesson Two – Formal and Informal Hazard Assessments
1 Quiz
Module One – Lesson Two – Knowledge Check
Module One – Lesson Three – Knowledge Check
1 Quiz
Module One – Lesson Four – Knowledge Check
Module Two – Identifying Hazards
1 Quiz
Module Two – Lesson One – Knowledge Check
Module Two – Lesson Two – Methods of Hazard Identification
1 Quiz
Module Two – Lesson Two – Knowledge Check
1 Quiz
Module Two – Lesson Three – Knowledge Check
1 Quiz
Module Two – Lesson Four – Knowledge Check
Module Three – Controlling Hazards
Module Three – Lesson One – Assessing and Prioritizing Risk
1 Quiz
Module Three – Lesson One – Knowledge Check
Module Three – Lesson Two – The Hierarchy of Controls
1 Quiz
Module Three – Lesson Two – Knowledge Check
Module Three – Lesson Three – Knowledge Check
Module Three – Lesson Four – Common Mistakes in Hazard Control
1 Quiz
Module Three – Lesson Four – Knowledge Check
Module Four – The Tools: JHA, FLHA and Toolbox Talks
Module Four – Lesson One – The Job Hazard Analysis (JHA)
1 Quiz
Module Four – Lesson One – Knowledge Check
1 Quiz
Module Four – Lesson Two – Knowledge Check
Module Four – Lesson Three – Toolbox Talks
1 Quiz
Module Four – Lesson Three – Knowledge Check
Module Four – Lesson Four – Knowledge Check
Final Quiz
Hazard Assessment and Control – Final Quiz

Take this next

Online Inspection Training

See the course

Free Safety Guides

Related Safety Guides

Browse all Safety Guides

Build a PPE program the right way: hierarchy of controls first, PPE requirements across Canada, fit testing, training and a free worksheet and register.

Use a 5 x 5 risk matrix to rate initial and residual risk as a team, set risk bands and actions, and meet Canadian rules. Free worksheet and Excel calculator.